SPREADER FEATURES

01 MONO-BEAM STRUCTURE
Our mono-beams provide better visibility to your crane operators and easy access during troubleshooting and maintenance. Because of the mono-beam structure, we could reduce the width of the midframe of the spreader. This allows you to install optional items like stacking fitting boxes, ladders, or lifting lugs.

02 BELT TELESCOPING SYSTEM
A steel strand enforced rubber belt system driven by hydraulic motors telescopes the mono-beams in and out the midframe. The belt has a high breaking point, runs fast, produces little noise and needs no lubrication. A mechanical blocking device is mounted inside the midframe to absorb horizontal forces on the endbeam during collision with a container or the cell inside a vessel.

03 ACTIVE SHOCK ABSORBING SYSTEM (SAS)
Our active shock absorbing system reduces the noise at your terminal. This enables you to operate 24/7 even if your terminal is in the vicinity of residential areas. The system increases the lifetime of the spreader and can be turned “On” and “Off” as you like.

04 AUTOMATIC GREASING SYSTEM
Our automatic greasing system can service up to 80 greasing points on your spreader. The system guarantees consistent spreader performance and less wear and tear. Meaning less down-time and lower maintenance cost. Our open-source software program enables you to adjust the cycle frequency and greasing volume yourself.

05 ULTRA-POWERFUL FLIPPERS
Our flippers are made of high tensile steel and are driven by cylinder based flipper actuators. We chose a cylinder-based design to maximize strength and operating performance during the spreader lifetime. A cylinder-based design also reduces the risk of oil leakages. The Stinis flipper–actuator combination has proven ultra-powerful when guiding the spreader onto the container resulting in more container moves per hour.

06 FLOATING (ISO) DUAL COLLAR TWISTLOCK
The twistlock is one of the most critical components of yourspreader. Our unique and patented design allows you to easily remove the twistlock nut for non-destructive testing. Another way in which the Stinis R&D team has tried to increase the life time of your equipment and reduce your maintenance cost.

01 MONO-BEAM STRUCTURE
Our mono-beams provide better visibility to your crane operators and easy access during troubleshooting and maintenance. Because of the mono-beam structure, we could reduce the width of the midframe of the spreader. This allows you to install optional items like stacking fitting boxes, ladders, or lifting lugs.

02 BELT TELESCOPING SYSTEM
A steel strand enforced rubber belt system driven by hydraulic motors telescopes the mono-beams in and out the midframe. The belt has a high breaking point, runs fast, produces little noise and needs no lubrication. A mechanical blocking device is mounted inside the midframe to absorb horizontal forces on the endbeam during collision with a container or the cell inside a vessel.

03 ACTIVE SHOCK ABSORBING SYSTEM (SAS)
Our active shock absorbing system reduces the noise at your terminal. This enables you to operate 24/7 even if your terminal is in the vicinity of residential areas. The system increases the lifetime of the spreader and can be turned “On” and “Off” as you like.

04 AUTOMATIC GREASING SYSTEM
Our automatic greasing system can service up to 80 greasing points on your spreader. The system guarantees consistent spreader performance and less wear and tear. Meaning less down-time and lower maintenance cost. Our open-source software program enables you to adjust the cycle frequency and greasing volume yourself.

05 ULTRA-POWERFUL FLIPPERS
Our flippers are made of high tensile steel and are driven by cylinder based flipper actuators. We chose a cylinder-based design to maximize strength and operating performance during the spreader lifetime. A cylinder-based design also reduces the risk of oil leakages. The Stinis flipper–actuator combination has proven ultra-powerful when guiding the spreader onto the container resulting in more container moves per hour.

06 FLOATING (ISO) DUAL COLLAR TWISTLOCK
The twistlock is one of the most critical components of your spreader. Our unique and patented design allows you to easily remove the twistlock nut for non-destructive testing. Another way in which the Stinis R&D team has tried to increase the lifetime of your equipment and reduce your maintenance cost.